Mounted drill VS 40-430 Castor

Pillar drilling machines VS40 CASTOR a POLLUX are designed for drilling, reaming and thread cutting in both single-part and series production. The headstock and worktable are vertically adjustable and revolving 360 degrees on the pillar. Machine VS40 are according the king of primary transmission divided in two types: Castor - primary transmission flexible. Pollux - primary transmission mechanical.

Both machines have hand-feed and power feed and they are noted for stepeed speed change of the spindle and they reach 12 (18) steps. The speed change is made through levers and switching over the speed of elektromotor.

The range Castor is equipped with flexible primary transmission and the shift of primary transmission is made through the jaw clutch (fall of shift the belts). Power feeds are shifted with laver too. The automatic clutch of power feed ensure self-cancelling of the power feed by overloading. The drilling depth is setting on milimetr scale.

The control elements of machines are located in front board of machine. The spindle is seating in accurate ball bearings, the spiral spring return spindle in the upper position. Lubrication of all movable parts is ensured throw the screw-feeder pump. There is an electric equipment concentrated in a box and in fully complies the EU safety regulations. 


VS 40-430 Castor
Drilling diameter 600 Mpa mm 40
Drilling depth mm 220
Cone in MORSE spindle MORSE 4
Drilling depth indicator
Drilling depth backstop
precision setting
Clamping table area - horizontal mm 600 x 490
T - grooves
3 x w 14, spacing 112
Dist. from spindle end to clamp. table area max/min mm 1000 / 180
Spindle reach mm 305
Diameter of column mm 140
Headstock vertical movement mm 180
Vertical movement of bracket with table mm 440
Vertical movement of table and headstock
geard rack
Spindle speed
- number of steps
- range r.p.m. 28 - 2800
Direction spindle speed
right - left
Primary transmission
by hand / mechanical
- number of steps
- range mm/r. 0,11 - 0,45
Clutch type
Maximum axial pressure on spindle N 11000
Motor V 3 x 400
Electric motor speed/output r.p.m/kW 700 / 1,3
1400 / 2,3
Coolant equipment
cont. 20 l, output 30 l/min
Maximum machine dimensions W x L x H mm 730 x 1130 x 2100
Machine weight (net/ gross) kg 660 / 725
Package (crating) dimensions W x L x H mm 1250 x 730 x 2200
Mounted drill VS 40-430 Castor